Functions (continued)

Altivar

variable speed drives

current limit

A 2

currentlimitcanbeconguredbetween0.25and1.5timesthenominaldrive

current and can be used to limit the torque and the rise in motor temperature.

Switching between the two current limits is enabled via a logic input or via the

Modbus serial link.

Automatic DC injection

ThisfunctionenablesstandstillDCinjection,whichcanbesetbetween0and

1.2timesthevalueofthenominaldrivecurrent(factory-setconguration:

0.7 x motor nominal current), as soon as operation is no longer controlled and

the motor speed is zero:

v Either for a period of time, which can be set between 0.1 and 30 s

v Or continuously

Factory-setconguration:FunctionactivewithDCinjectionfor0.5s.

In3-wirecontrol,DCinjectionisonlyactiveiflogicoutputLI1isactive

(assigned to stop).

Motor control proles

Threemotorcontrolprolesareavailabledependingontheapplication

requirements:

v Standard (U/F):Simplemotorcontrolprolemaintainingaconstantvoltage/

frequency ratio with an optional low speed setting.

Prolesuitableforsmallconveyors,applicationswithmotorsconnectedin

parallel, etc.

v Performance (sensorless ux vector control):Prolewhichcanguaranteethe

levelofperformancewithamotorwiththesamepoweroroneratingless.Thisprole

canbeusedtoobtainimproveddynamicspecicationsatlowspeed.

Prolesuitableforrunningmachines,etc.

v Pump/Fan (Kn²): Quadratic ratio for obtaining a torque proportional to the square

ofthespeed.Thisprolecanbeusedtooptimizeenergyconsumptionaccordingto

the load applied to the machine.

Prolesuitableforpumpregulation,airextraction,etc.

Switching frequency, noise reduction

The switching frequency setting between 2 and 16 kHz permits a reduction in the

noise generated by the motor for any application requiring a low level of noise.

The switching frequency can be modulated randomly in order to avoid resonance.

This function can be disabled if it causes instability.

Switching the DC voltage at high frequency is useful for supplying the motor with a

current wave having little harmonic distortion.

This type of operation increases drive overheating.

Factory-setconguration:Lowfrequencysetat4kHz.

Frequency jump

Used to pass a mechanical resonance point likely to cause increased noise or risk of

mechanical breakdown.

Thefrequencyjumpisxed.Itiswithin±1Hzoftheconguredresonancepoint.

Jog mode

Thiscanbeusedforpulseoperationwithminimumramptimes(0.1s),axedspeed

reference set at 5 Hz and minimum time of 0.5 s between 2 pulses.

Enabled by 1 logic input and pulses issued by the operating direction command.

This function is suitable for machines with product insertion in manual mode (for

example, gradual movement of the mechanism during maintenance operations).

Introduction:

page 8

Specications:

page 10

References:

page 14

Dimensions:

page 18

Connections:

page 22

Setting the “DC injection” function with the SoMove

setup software

Energy saving with the

Pump/Fan prole (Kn

)

Frequency jump in relation to the resonance point

2 Hz

± 1 Hz

Reference

f (Hz)

Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 40

Commenti su questo manuale

Nessun commento

Banner RP-LS42 Rope Pull Switches podręczniki

Instrukcje obsługi i podręczniki użytkownika dla Maszyny specjalne Banner RP-LS42 Rope Pull Switches.
Dostarczamy 1 pdf podręczników Banner RP-LS42 Rope Pull Switches do pobrania za darmo według typów dokumentów: Instrukcja Użytkownika

Banner RP-LS42 Rope Pull Switches Instrukcja Użytkownika (12 strony)

Marka: Banner | Kategoria: Special machinery | Rozmiar: 0.95 MB |

Spis treści

Features

Important Information

RP-LS42F-75L.. Series

Więcej produktów i instrukcji dla Maszyny specjalne Banner

Modele	Rodzaj dokumentu
Safe Speed Monitoring Modules	Instrukcja Użytkownika Banner Safe Speed Monitoring Modules User Manual, 15 strony
MMD-TA-11B Muting Modules	Instrukcja Użytkownika Banner MMD-TA-11B Muting Modules Benutzerhandbuch, 84 strony
ES-FA-6G Safety Module	Instrukcja Użytkownika Banner ES-FA-6G Safety Module User Manual, 12 strony
ES-FA-6G Safety Module	Instrukcja Użytkownika Banner ES-FA-6G Safety Module User Manual, 22 strony
Compact Plastic Style Safety Interlock Switches	Instrukcja Użytkownika Banner Compact Plastic Style Safety Interlock Switches User Manual, 10 strony
EZ-ARRAY Lens Shields	Instrukcja Użytkownika Banner EZ-ARRAY Lens Shields User Manual, 4 strony
Safety Mat Monitoring Modules	Instrukcja Użytkownika Banner Safety Mat Monitoring Modules User Manual, 16 strony
MSM Series Corner Mirrors	Instrukcja Użytkownika Banner MSM Series Corner Mirrors User Manual, 4 strony
Extension Modules	Instrukcja Użytkownika Banner Extension Modules User Manual, 8 strony
USA Series Protective Mounting Stands	Instrukcja Użytkownika Banner USA Series Protective Mounting Stands User Manual, 4 strony
RP-RM83F Rope Pull Switches	Instrukcja Użytkownika Banner RP-RM83F Rope Pull Switches User Manual, 11 strony
Safety Mat Monitoring Modules	Instrukcja Użytkownika Banner Safety Mat Monitoring Modules User Manual, 8 strony

Schneider Electric Multi-Loader Specifiche Pagina 34

Commenti su questo manuale

Prodotti e manuali riguardandi Misurazione, test & controllo Schneider Electric Multi-Loader

Banner RP-LS42 Rope Pull Switches podręczniki

Banner RP-LS42 Rope Pull Switches Instrukcja Użytkownika (12 strony)

Spis treści

Więcej produktów i instrukcji dla Maszyny specjalne Banner