Schneider Electric INTERBUS Basic Specifiche Scaricare il pdf (Pagina 64)

Modicon

™

Momentum

™

automation platform

M1/M1E processor adapters

Introduction

Modicon

™

Momentum

™

M1/M1E processor adapters are based on the Modicon 984

family of products. You can mount these adapters on Modicon Momentum I/O Bases

to provide intelligence to the I/O. The processor adapter can quickly and

independently solve logic, control its own local I/O (discrete or analog), and

communicate to other control entities through one of a number of Modicon

Momentum communication options. The processor adapter can turn an ordinary I/O

Base into a PID controller or high-speed logic solver.

You can create your own controller from a number of different bases, and with other

Modicon Momentum options, network your local logic solvers together into an

intelligent subsystem as part of a larger Modicon application, or into a stand alone,

integrally networked system with local controllers with extended I/O.

Modicon Momentum M1/M1E processor adapters can stand alone, or be mounted

on a single Modicon Momentum I/O Base (with its own extended Modicon

Momentum I/O connected to the I/O Bus Port on 171 CCS 760 00 processor

adapter). It can also be mounted together with one of a variety of Modicon

Momentum Option adapters – providing different network capabilities, a time-of-day

clock, and a battery back-up system. The built-in ash memory is used to store the

executive, allowing for convenient eld upgrades of the operating system. The ash

memory can also be used to back up your applications, creating a local copy of your

program to be loaded back into RAM, thus providing original program le integrity.

On the 171 CCS 780 00 processor adapter, the RS 485 port can be used to connect

to dedicated devices such as an operator interface panel or a marquee, or used in a

master/slave RS 485 network to connect to multiple devices.

The processor adapters can be programmed with Modsoft

™

version 2.5 or greater,

Concept

™

version 2.1 or greater, ProWORX

™

NxT version 2.0 or greater or

ProWORX 32.

The following table describes the specications of the Modicon Momentum M1/M1E

processor adapters.

Specications

Processor adapter RAM Memory Flash Memory Scan Time Modbus Port I/O Bus Port IEC Executive

171 CCS 700 00 64 K 256 K 1 ms/K 1 x RS 232C – –

171 CCS 700 10 64 K 256 K 0.63 ms/K 1 x RS 232C – –

171 CCS 760 00 256 K 256 K 0.63 ms/K 1 x RS 232C 1 x I/O Bus Compatible

171 CCS 780 00 64 K 256 K 1 ms/K 1 x RS 232C

1 x RS 485

– –

171 CCC 760 10 512 K 512 K 1 ms/K 1 x RS 232C 1 x I/O Bus Compatible

171 CCC 780 10 512 K 512 K 1 ms/K 1 x RS 232C

1 x RS 485

– Compatible

171 CCC 960 20 544 K 512 K .3 ms/K 1 x Ethernet 1 x I/O Bus –

171 CCC 960 30 544 K 1 Mb .3 ms/K 1 x Ethernet 1 x I/O Bus Supplied

171 CCC 980 20 544 K 512 K .3 ms/K 1 x RS 485

1 x Ethernet

– –

171 CCC 980 30 544 K 1 Mb .3 ms/K 1 x RS 485

1 x Ethernet

– Supplied

Programming Software for Modicon Momentum

Modicon Momentum processor adapters have a number of PC programming

software options available. You can program your processor adapter via the

Modbus RS 232 serial port, or with an M1E processor via Ethernet network.

If using a Modbus Plus Option adapter in conjunction with a Processor adapter, you

can program via an SA85 card installed in a PC and connected to the same

Modbus Plus network.

For more specic information, see the appropriate Modicon Momentum, ProWORX

or Concept programming software literature and documentation.

Introduction

Specications:

pages 64 to 67

References:

page 68

1 2 ... 59 60 61 62 63 64 65 66 67 68 69 ... 110 111

Commenti su questo manuale

Nessun commento

Schneider Electric INTERBUS Basic Specifiche Pagina 64

Commenti su questo manuale