Schneider Electric TSXETG100 Manuale Utente Scaricare il pdf (Pagina 100)

Setup

100

Routing

Connection

With this modem connection the user can access Modbus device data and Ethernet

server data and can also access the server on a different network.

Simply:

l check the Use Eth IP Addr as PPP IP Addr box in the IP/PPP Configuration

page so that the PPP address of the module (85.16.0.2) becomes that of the IP

address. The client PC then polls the Ethernet server device directly,

l give the IP address of the router as the module gateway address (Default

Gateway) so that requests pass through the router,

l modify the server gateway addresses (Default Gateway) so that requests arrive

at the correct destination.

Connection example:

TSX ETG 10000

Ethernet

connection

CLIENT

Modem

Switched

Telephone

Network

REMOTE

ACCESS

IP:139.124.2.100

Modem

IP:85.16.0.10

SERVER

ROUTER

IP: 139.124.2.2

SMask:255.255.255.0

Gateway:139.124.2.100

IP:100.32.0.72

SMask:255.255.0.0

Gateway: 100.32.0.1

IP:100.32.0.1

IP:139.124.2.1

IP:139.124.2.100

SMask:255.255.255.0

Gateway: 139.124.2.1

1 2 ... 95 96 97 98 99 100 101 102 103 104 105 ... 191 192

Nessun commento

Schneider Electric TSXETG100 Manuale Utente Pagina 100